Ricoh SAVIN D0AP - Printer Sp Mode; Sp1-XXX (Service Mode)

Printer SP Mode
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 3-8 SM
3.3 PRINTER SP MODE
3.3.1 SP1-XXX (SERVICE MODE)
1001 [Bit Switch]
1-001-001 Bit Switch 1 Settings 0 1
bit 0 DFU - -
bit 1 sysName value Model name (PnP name) Hostname
This BitSw can switch the value of the sysName of the standard MIB.
bit 2 DFU - -
bit 3 I/O timeout Enabled Disabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting
will have no affect. I/O Timeouts will never occur.
bit 4 SD card save mode Disabled Enabled
This BitSw enables the SD card save mode setting menu to be displayed.
After enabling this BitSw, the Card Save settings will appear under:
"User Tools > Machine Features > Printer Features > List/Test print"
bit 5 Paper size error margin ±5pt ±10pt
When a PS job is printed on a custom paper size, the job might not print
because of a paper size mismatch caused by a calculation error. This BitSw
can set the allowable margin of error value.
Note: This is available for PS, PDF only.
bit 6 DFU - -
bit 7 DFU - -
1001 [Bit Switch]
1-001-002 Bit Switch 2 Settings 0 1
bit
0
DFU - -
bit
1
DFU - -
bit
2
DFU - -
bit
3
PDL auto switching Enabled Disabled
Enables/Disables the MFPs ability to switch the PDL processor when receiving
a job which contains both PS and PCL5e/c.
bit
4
DFU - -