Ricoh SAVIN D0AP - Service Tables; Sp1-XXX (Bit Switches); Sp2-XXX (Ram)

Service Tables
SM 47 D0C5/D0C6/D0C4/D0AP FAX UNIT
FAX UNIT
(D0C5/D0C6
/D0C4/D0AP)
4.2 SERVICE TABLES
4.2.1 SP1-XXX (BIT SWITCHES)
Bit Switches
1 Mode No. Function
101 System Switch
001 –
032
00 –
1F
Change the bit switches for system settings for the fax option
See "Bit Switches - 1"
102 Ifax Switch
001 –
016
00 –
0F
Change the bit switches for internet fax settings for the fax option
See "Bit Switches - 2"
103 Printer Switch
001 –
016
00 –
0F
Change the bit switches for printer settings for the fax option
See "Bit Switches - 2"
104 Communication Switch
001 –
032
00 –
1F
Change the bit switches for communication settings for the fax option
See "Bit Switches - 3"
105 G3-1 Switch
001 –
016
00 –
0F
Change the bit switches for the protocol settings of the standard G3
board
See "Bit Switches - 4"
111 IP fax Switch
001 –
016
00 –
0F
Change the bit switches for optional IP fax parameters
See "Bit Switches - 5"
4.2.2 SP2-XXX (RAM)
2 Mode No. Function
101 RAM Read/Write
001 Change RAM data for the fax board directly. See "Service
RAM Addresses"
102 Memory Dump
001 G3-1 Memory
Dump
Print out RAM data for the fax board.
See "Service RAM Addresses"
103 G3-1 NCU Parameters
001 –
023
CC, 01 – 22 NCU parameter settings for the standard G3 board. See
"NCU Parameters"