Postscript3 Unit Type P18 (M543-04, -05, -06)/ M34 (D3EN-10, -11, -12)
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 2-118 SM
Printer model:
MF model:
4. Plug in the power cord, and then turn on the machine
5. Confirm that the SD card was installed correctly.
Printer model: The name of the installed emulation card appears in the [Prioritize
Emulation/Program] of [System Settings].
MF model: The name of the installed emulation card appears in the [Prioritize
Emulation/Program] of [System Settings] under [Initial Settings of the Printer]
6. Attach the decal [A] on the front cover as shown below.
To Next Page
