Remarks
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 3-2 SM
Notation What it means
* An asterisk (*) to the left side of ENG/CTL column means that this mode is stored in the
NVRAM. If you do a RAM clear, this SP mode will be reset to the default value. "ENG"
and "CTL" show which NVRAM contains the data.
• *ENG: NVRAM on the BCU board
• *CTL: NVRAM on the controller board
SSP This denotes a "Special Service Program" mode setting.
To Next Page
Loading...
