Printer SP Mode
SM 3-11 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Tables
MFP/Printer
- BMLinkS: 05A and earlier models
IRIPS PS/PDF:
- 09A and earlier models: Operation under current model specification is not
supported (Operation with older specification is recommended)
- 15S and later models: Operation under current model specification is
supported.
bit 7 Paper path for letterhead
simplex job
Simplex paper path Duplex paper path
This setting enables the simplex job to be routed through the duplex unit.
Only affects jobs specified as letterhead.
1001 [Bit Switch]
1-001-006 Bit Switch 6 Settings 0 1
bit 0 to 7 DFU - -
1001 [Bit Switch]
1-001-007 Bit Switch 7 Settings 0 1
bit 0 to 7 DFU - -
1001 [Bit Switch]
1-001-008 Bit Switch 8 Settings 0 1
bit
0
DFU - -
bit
1
DFU - -
bit
2
DFU - -
bit
3
DFU - -
bit
4
DFU - -
bit
5
DFU - -
bit
6
PJL/PDL Color Command Priority (Only MF
model)
PJL Priority PDL Priority
This setting enables the priority of a PDL color command to be changed when
a PJL color command is "@PJL RENDERMODE = GRAYSCALE" in a job.
Note: This is available for PCL,RPCS,PS.
bit DFU - -
To Next Page
Loading...
