Ricoh SAVIN D0AP - Page 836

SP5-XXX (Mode) - Controller
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 5-60 SM
SP No. Large Category Small Category ENG
or
CTL
[Min to Max / Init. /
Step]
5-993-004 SP Text
Mode(Privacy)
Logging Data CTL [0 to 255 / 0 / 0]
5-993-005 SP Text
Mode(Privacy)
Diagnostic Report CTL [0 to 255 / 0 / 0]
5-993-006 SP Text
Mode(Privacy)
Non-Default CTL [0 to 255 / 0 / 0]
5-993-007 SP Text
Mode(Privacy)
NIB Summary CTL [0 to 0 / 0 / 0]
5-993-008 SP Text
Mode(Privacy)
Capture Log CTL [0 to 255 / 0 / 1]
5-993-021 SP Text Mode Copier User Program CTL [0 to 0 / 0 / 0]
5-993-022 SP Text
Mode(Privacy)
Scanner SP CTL [0 to 255 / 0 / 0]
5-993-023 SP Text
Mode(Privacy)
Scanner User Program CTL [0 to 255 / 0 / 0]
5-993-024 SP Text
Mode(Privacy)
SDK/J Summary CTL [0 to 0 / 0 / 0]
5-993-025 SP Text
Mode(Privacy)
SDK/J Application Info CTL [0 to 0 / 0 / 0]
5-993-026 SP Text
Mode(Privacy)
Printer SP CTL [0 to 255 / 0 / 0]
5-993-027 SP Text
Mode(Privacy)
SmartOperationPanel SP CTL [0 to 255 / 0 / 0]
5-993-028 SP Text
Mode(Privacy)
SmartOperationPanel UP CTL [0 to 255 / 0 / 0]
NOTE: - This is a setting to switch whether to display the alert. Also, it applies to whether
to send an NRS notification.
- This setting is valid when SP5-930-001 (MeterClick Charge Setting) is set to “1
(Yes)”.
- For the click model, this setting is configured to "0 (No)" before delivery.