EasyManua.ls Logo

Ricoh SAVIN D0AP - Page 956

Ricoh SAVIN D0AP
1067 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Codes
SM 35 D0C5/D0C6/D0C4/D0AP FAX UNIT
FAX UNIT
(D0C5/D0C6
/D0C4/D0AP)
Code Meaning Suggested Cause/Action
22-05 No G3 parameter confirmation
answer
• Defective FCU board or firmware.
22-06 The fax number / e-mail address
entered or selected by the user does
not match that of the destination.
(This may occur because of a bug.)
• Software error.
Install lateset FCU firmware.
• FCU board defective
Replace the FCU.
22-07 File to send missing during IP-Fax /
Internet Fax / Scan to Email / Scan
to Folder transmission.
22-08 File missing when printing the
configuration page.
22-09 File missing when receiving fax.
22-10 File missing is when storing a
received fax file.
23-00 Data read timeout during
construction
• Restart the machine.
• Replace the FCU.
25-00 The machine software resets itself
after a fatal transmission error
occurred
• Update the ROM
• Replace the FCU.
F0-xx V.34 modem error
• Replace the FCU.
F6-xx SG3 modem error
• Update the SG3 modem ROM.
• Replace the SG3 board.
• Check for line noise or other line problems.
• Try communicating another V.8/V.34 fax.

Table of Contents