Bit Switches – 2
D0C5/D0C6/D0C4/D0AP FAX UNIT 66 SM
2 When sending Tiff files to the mail/folder destinations, selects the resizing function in the
main scan direction.
Controls ON/OFF of the function, that fit the Tiff files sent from the fax application, within the
standard size.
0: Disabled (not resizing)
1: Enabled (resizing)
3-7 Not Used (do not change these settings)
I-fax Switch 06 - Not used (do not change the settings)
I-fax Switch 07 - Not used (do not change the settings)
I-fax Switch 08 (SP No. 1-102-009)
No Function Comments
0-7 Memory Threshold for POP Mail Reception
This setting determines the amount of SAF (Store and Forward) memory. (SAF stores fax
messages to send later for transmission to more than one location, and also holds incoming
messages if they cannot be printed.) When the amount of SAF memory available falls below
this setting, mail can no longer be received; received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount of
memory.
I-fax Switch 09 (SP No. 1-102-010)
No Function Comments
0-3 Not used Do not change the settings
4-7 Restrict TX
Retries
This setting determines the number of retries when connection and
transmission fails due to errors.
01-F (1-15 Hex)
I-fax Switch 0A - Not used (do not change the settings)
I-fax Switch 0B - Not used (do not change the settings)
I-fax Switch 0C - Not used (do not change the settings)
I-fax Switch 0D (SP No. 1-102-014)
No Function Comments
0-1 Not used Do not change the
settings
2-3 Select the signature when sending mail notification of the send
results
In response to
IEEE2600.1.
To Next Page
