R&S FSL CALCulate Subsystem (CDMA, K82)
1300.2519.12 6.603 E-11
CALCulate:STATistics Subsystem (CDMA, K82)
The CALCulate:STATistics subsystem controls the statistical measurement functions. The
measurement window cannot be selected for these measurement functions. No numeric suffix at
CALCulate is available.
Commands of the CALCulate:STATistics Subsystem
– CALCulate:STATistics:CCDF[:STATe]
– CALCulate:STATistics:NSAMples
– CALCulate:STATistics:RESult<1…4>?
– CALCulate:STATistics:SCALe:Y:LOWer
– CALCulate:STATistics:SCALe:Y:UPPer
CALCulate:STATistics:CCDF[:STATe]
For details refer to the "CALCulate:STATistics:CCDF[:STATe]" command of the base unit on
page 6.112.
CALCulate:STATistics:NSAMples
For details refer to the "CALCulate:STATistics:NSAMples" command of the base unit on page
6.113.
CALCulate:STATistics:RESult<1…4>?
For details refer to the "CALCulate:STATistics:RESult<1...6>?" command of the base unit on
page 6.114.
CALCulate:STATistics:SCALe:Y:LOWer
For details refer to the "CALCulate:STATistics:SCALe:Y:LOWer" command of the base unit on
page 6.115.
CALCulate:STATistics:SCALe:Y:UPPer
For details refer to the "CALCulate:STATistics:SCALe:Y:UPPer" command of the base unit on
page 6.116.
To Next Page
Loading...
