Machinery Balancing Module
How to Perform a 1-2 Plane with Prognosis Procedure
The 1-2 Plane with Prognosis Summary Table
Figure 5 - 39.
Example of a Summary Table When You
Select to Proceed with a 1-Plane Prognosis.
In the above 1-2 Plane with Prognosis job’s Summary table, note that trial weight and
correction weight data are missing for plane B, however, trial run and correction run
data are still present for both planes A and B.
You can use the up / down arrow keys to highlight a balancing run
item and press the Goto function button to resume the balancing
job at that point.
5 - 46 SKF Microlog - GX Series
User Manual
To Next Page
Loading...
