Spindle Test Module
How to Perform a Survey
Figure 10 - 4.
A Machine Graphic Indicating Measurement Locations.
• Press the Table function button to return to the Measurement Results screen.
• Safely secure the sensor to the machine at the proper location / orientation and
press an Enter key to begin testing. The screen momentarily displays a message
indicating a measurement in progress, then displays test results for the current
measurement position, and automatically sequences to the next position.
Figure 10 - 5.
Example Test Results.
SKF Microlog - GX Series 10 - 5
User Manual
To Next Page
Loading...
