ID 442426.04 321WE KEEP THINGS MOVING
Optimize
15
Manual SD6
Reference value of the magnetization current.
Reference value for the torque generating current as a A.
For control modes with torque specification only. Reference torque or reference
force currently required by the speed controller. The reference value for
consideration on the load side is C09, for consideration on the motor side B18.
(Internally) calculated torque generating reference current.
Equivalent to the rated current for asynchronous motors and the standstill
current for synchronous servo motors.
E165 Id-ref version 0
E166 Iq-ref version 0
E170 T-reference version 0
E172 Iq-reference version 0
To Next Page
Loading...
