ID 442426.04 414WE KEEP THINGS MOVING
Diagnosis
16
Manual SD6
43:X140EnDatAlar The EnDat encoder at X140 reports an
alarm.
• Switch the drive controller off and back
on again.
• The encoder is faulty. Please contact
our service department.
Yes
44:X140EnDatCRC Errors accumulate during data transfer. The
encoder is not available.
• Make sure that the correct encoder type
is connected.
• Check the connection and shielding of
the encoder cable.
• Reduce the electromagnetic
interference.
• Please contact our Service department.
Yes
Cause Description Measure Confirmable
To Next Page
Loading...
