Xerox WorkCentre 6605 Service Manual

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-35
Installation Settings (Installation)
Set the parameter as indicated in the following table.
Item Range Description
Serial No. 9 digits Displays or changes the 9 digits serial number.
PagePack Enable,
Disable
Displays the current PagePack status (Enable or
Disable).
HexDump ON,OFF Specifies whether HexDump to set to ON or
OFF.
Tone Correction (IOT tone control) ON,OFF Specifies whether IOT Tone Correction to set to
ON or OFF.
Pixel Counter 0-100% Displays the last print pixel coverage (%) for 4
mm square meter in A4 paper, per Y/M/C/K
color.
Configuration Dip Switch0 - Operates the DIP switches on the NVM in ESS.
Dip Switch1
Dip Switch2
Dip Switch3
XCPT Mode Legacy,
XCPT
Displays/Specifies the XCPT Mode setting.
Legacy: Follows the rule of the existing print
service.
XCPT: Follows the XCPT (XFCI) rule.

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)