Service Parts Disassembly
Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
4-16
MFP Drive Assembly
PL3.1.1
1. Remove the Development HVPS Board. (page 4-99)
2. Remove the IP Board. (page 4-104)
3. Remove the three screws (silver, 6mm) that attach the MFP Front IP Board Plate (PL18.1.23) to the
printer and remove the plate.
4. Remove the IP Board Bracket (PL18.1.38) and the MFP IP Board Bracket (PL18.1.46) by removing
the screw (silver, 6mm) that attaches each bracket.
To Next Page
Loading...
