Xerox WorkCentre 6605 Service Manual

General Information
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
1-66
Functions
Resolution
Line Density in Fast Scan Direction: 600 dots/25.4mm
Line Density in Slow Scan Direction: 600 dots/25.4mm (fixed)
Operation Mode
Power-off State
The power switch is off and no power is supplied. The machine does not operate.
Ready (Standby) Mode
When the system starts up by power-on, it shifts from the power-off state to the Ready mode.
After pressing “Power Saver button” on the operator panel, the machine enters the Energy Saver Mode
to save more power consumption.
Running Mode
There are the Print mode, Scan mode, and FAX communication mode in which the IOT, IIT, and FAX
communication operate respectively.
Print Mode
In this mode, the IOT is operating for printing and report printing.
Scan Mode (MFP only)
In this mode, the IIT is operating for copy scanning, local scanning, network scanning, and FAX
scanning.
FAX Communication Mode (MFP only)
In this mode, FAX sending/receiving is in progress.

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)