EasyManuals Logo

Xerox WorkCentre 6605 Service Manual

Xerox WorkCentre 6605
662 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #328 background imageLoading...
Page #328 background image
Image Quality
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
3-2
Initial Steps for Image Quality Troubleshooting
In order to resolve an end user’s image quality problem, it is necessary to clearly understand the nature
of the problem (streaks, color deterioration, and blanks). To determine the cause of the print problem
faced by the end user, first confirm the following items to grasp the status of use by the end user.
1. Is the paper matched with the Print Media Guidelines?
2. Is the remaining amount of the toner sufficient?
3. Has the printer been cleaned up lately?
Confirm the Printer Status
Toner
When the remaining amount of the toner is low, image quality problems such as faint print,
streaks, white lines, and blanks) occur. Ask the end user to print the lower-capacity document
using a different application, confirm the problem repeatability, and then check that the
remaining amount of the toner is sufficient for printing. When a document is printed by an end
user, the dialog box indicating the remaining amount of the toner appears on the laser printer
status monitor.
When the remaining amount of the toner is low, the end user can extend the life of the toner
cartridge slightly by removing the cartridge from the printer, shaking it right and left slowly (this
softens the firm toner), and reinstalling the cartridge.
Cleaning
Image quality problems such as smears and toner spots might occur when particles of paper,
toner, or dust is piled up in the printer. Cleaning the inside of the printer can prevent the problems.

Table of Contents

Other manuals for Xerox WorkCentre 6605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6605 and is the answer not in the manual?

Xerox WorkCentre 6605 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print ResolutionUp to 600 x 600 x 4 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Fax Speed33.6 Kbps
Standard Paper Capacity550 sheets
Maximum Paper Capacity1, 250 sheets
Paper Output250 sheets
Duplex PrintingYes
Processor533 MHz
Memory (Standard)512 MB
Memory (Maximum)1 GB
Monthly Duty CycleUp to 80, 000 pages
TypeMultifunction
Copy SpeedUp to 36 cpm black and color
Fax Resolution300 x 300 dpi
Media SizesLetter, Legal, A4, A5, B5, Custom sizes
ConnectivityUSB 2.0, Ethernet
Mobile PrintingApple AirPrint
Operating System CompatibilityWindows, Mac, Linux
Dimensions (W x D x H)500 mm
Weight29.6 kg
Print SpeedUp to 36 ppm (Black) / Up to 36 ppm (Color)

Related product manuals