Xerox WorkCentre 6605

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-61
Scanner Maintenance
White Balance
Adjusts the White Balance.
Shading Parameter
Specifies the Shading factor.
Item
Display After Diag
Normal Error
Auto Adjust(FB) Adjust OK Auto Adjust(FB) Adjust NG
Auto Adjust(DADF) Adjust OK Auto Adjust(DADF) Adjust NG
Item Range
Coeff FB RED 4 digits (hexadecimal)
(each digit 0 - 9, A - F)
Coeff FB GREEN
Coeff FB BLUE
Coeff FB GRAY
Coeff DADF RED 4 digits (hexadecimal)
(each digit 0 - 9, A - F)
Coeff DADF GREEN
Coeff DADF BLUE
Coeff DADF GRAY
Target RED 2 digits (hexadecimal)
(each digit 0 - 9, A - F)
Target GREEN
Ta r g e t B LU E
Ta r g e t G R AY