EasyManuals Logo

Xerox WorkCentre 6605 Service Manual

Xerox WorkCentre 6605
662 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #586 background imageLoading...
Page #586 background image
Maintenance
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
6-18
Adjustments and Maintenance Procedures
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1. At the control panel, press the Menu button (SFP) or Machine Status button (MFP).
2. SFP: Navigate to Admin Settings, then press OK.
MFP: Touch Tools, then touch Admin Settings.
3. SFP: Navigate to Service Tools, then press OK.
MFP: Touch Service Tools.
4. SFP: Select Auto Regi Adjust, then press OK.
MFP: Touch Auto Registration, then touch ON.
5. SFP: Select On, then press OK.
MFP: Touch OK.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can
run this adjustment at other times as needed.
To perform an automatic color registration adjustment:
SFP Procedure
1. At the printer control panel, press the Menu button.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Adjust Color Regi, then press OK.
5. At Auto Adjust, press OK.
6. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
7. To begin the calibration, press OK.
MFP Procedure
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Color Registration > Auto Registration > On.
The printer runs while it performs the Auto Registration routine.

Table of Contents

Other manuals for Xerox WorkCentre 6605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6605 and is the answer not in the manual?

Xerox WorkCentre 6605 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print ResolutionUp to 600 x 600 x 4 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Fax Speed33.6 Kbps
Standard Paper Capacity550 sheets
Maximum Paper Capacity1, 250 sheets
Paper Output250 sheets
Duplex PrintingYes
Processor533 MHz
Memory (Standard)512 MB
Memory (Maximum)1 GB
Monthly Duty CycleUp to 80, 000 pages
TypeMultifunction
Copy SpeedUp to 36 cpm black and color
Fax Resolution300 x 300 dpi
Media SizesLetter, Legal, A4, A5, B5, Custom sizes
ConnectivityUSB 2.0, Ethernet
Mobile PrintingApple AirPrint
Operating System CompatibilityWindows, Mac, Linux
Dimensions (W x D x H)500 mm
Weight29.6 kg
Print SpeedUp to 36 ppm (Black) / Up to 36 ppm (Color)

Related product manuals