Xerox WorkCentre 6605 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
4-3
Before starting service work
WARNINGS:
• To avoid injury or death due to electrical shock, unplug the power cord from the wall
outlet.
• To avoid burns, allow the Fuser to cool before performing service operations around it.
CAUTION: Many parts are secured by plastic tabs. Do not excessively flex or force these parts. Do
not over-torque screws threaded into plastic.
• If necessary, remove Imaging Units (Xero Deve Assembly) before disassembling the printer.
• Avoid using excessive force when removing or installing parts to prevent possible malfunction or
breakage.
• Since various types of screws are used, ensure that the right screws are replace in the correct
positions.
Be careful not to confuse screws for plastic with screws for sheet metal. Using the wrong type of
screw may result in damage to the screw threads or other troubles.
• At the locations with "TAP" marked on the base material and sheet metal, use the tap screw for
plastic.

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)