Xerox WorkCentre 6605

Maintenance
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
6-20
8. SFP: Navigate to Enter Number.
MFP: Touch Enter Registration Value.
9. To enter values for each LY, LM, and LC fields,
SFP: use the Up and Down arrow buttons. Adjust the value to what you circled for each field, then
press OK.
MFP: use - and + to adjust the value to what you circled in step 5.
10. SFP: Repeat step 9 to enter values for each RY, RM, and RC field, and each PY, PM, and PC fields.
MFP: Touch Next.
11. MFP only: To enter values for each RY, RM, and RC fields, use - and + to adjust the value to what
you circled in step 6.
12. MFP only: Touch Next.
13. MFP only: To enter values for each PY, PM, and PC fields, use - and + to adjust the value to what
you circled in step 7.
14. MFP only: Touch OK.
15. SFP & MFP: Print another Registration Chart, then repeat the process until you complete the color
registration corrections.
16. MFP only: Touch the Back arrow to return to the next menu level, or press the Services Home
button to return to Service Home.