Xerox WorkCentre 6605 Service Manual

Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
A-3
DRV Drive
DUP Duplex
Duplex 2-sided printing
EA Emulsion Aggregation (Toner)
EEPROM Electrically Erasable Programmable Read-Only Memory
ESD Electrostatic Discharge. A transfer of charge between bodies at
different electrostactic potential.
ESS Image process controller
FCC Federal Communications Commission
FDR Feeder
FPOT First Print Output Time
FRU Field Replaceable Unit
GB Giga Byte
GDI Graphics Device Interface
GND Ground
HARN Harness
HCF High-Capacity Feeder
HDD Hard Disk Drive
HUM Humidity
HV High Voltage
HVPS High-Voltage Power Supply
Hz Hertz (cycles per second)
IDT Intermediate Drum Transfer
IEC International Electrotechnical Commission
I/F Interface
IIT Image Input Terminal - DADF, Scanner
IOT Image Output Terminal - the printer
IP Image Processor
KB Kilo Byte
LAN Local Area Network
LCD Liquid Crystal Display
Acronym Description

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)