Event codes
9836 3123 01 403 (428)
Trend deviation alarm, the subgroup torque range value
has been below the average range value of the average of
the latest ten subgroups 7 times consecutively.
Trend deviation alarm, the last subgroup torque average
is outside Xtq-bar-bar - 2 sigma.
Trend deviation alarm, the last subgroup torque range
average is outside Rtq-bar-bar - 2 sigma.
The last subgroup mean angle value is larger than the
upper control limit.
The last subgroup mean angle value is lower than the
lower control limit.
The last subgroup range angle value is larger than the
upper control limit.
The last subgroup range angle value is lower than the
lower control limit.
The angle Cp is lower than 2.
The angle Cpk is lower than 1.33.
Trend deviation alarm, the subgroup angle mean value
has increased 7 times consecutively.
Trend deviation alarm, the subgroup angle mean value
has decreased 7 times consecutively.
Trend deviation alarm, the subgroup angle range value
has increased 7 times consecutively.
Trend deviation alarm, the subgroup angle range value
has decreased 7 times consecutively.
Trend deviation alarm, the subgroup angle mean value
has been above the average mean value of the average of
the latest ten subgroups 7 times consecutively.
Trend deviation alarm, the subgroup angle mean value
has been below the average mean value of the average of
the latest ten subgroups 7 times consecutively.
Trend deviation alarm, the subgroup angle range value
has been above the average range value of the average of
the latest ten subgroups 7 times consecutively.
To Next Page
Loading...
Need help?
General
