4-44
Chapter 4. Functions
Handling Precautions
• When operation is brought back to the start of a pattern by the cycle function,
PV start is not executed.
• When PV start is enabled in the next pattern linked by the pattern link
function, PV start is executed.

Cycle
Cycle is a function that repeats the operation of an entire pattern.
The number of times the cycle repeats can be set for each pattern.
The number of times set + 1 is the total pattern operation count.
Item Display Description Initial value
Cycle
(Pattern bank)
MENU > Pattern
Cycle
0 to 32000 0
SP
Time
Cycle 0 Cycle 1 Cycle 2

Pattern link
Pattern link is a function that links multiple patterns.
The pattern number of the link destination pattern can be set for each pattern.
The pattern number of another pattern to be linked can be set for the link
destination pattern.
Item Display Description Initial value
Pattern link
(Pattern bank)
MENU > Pattern
Pattern link
0: No link
1 to 16
0
Time
SP
Link source
Link destination (1st)
Link destination (2nd)
To Next Page
Loading...
Need help?
General
