Azbil C7G User Manual

14-15
Chapter 14. Appendix
Changed so that the SD icon blinks during
SD card recognition in the display unit
4 - 19 CDS (Compact Data
Storage)
Screen during CDS operation (p.4-106)
Changed the content of
“Handling Precautions”
Changed the naming rule for files in the
CDS
4 - 19 CDS (Compact Data
Storage)
Files (p.4-107)
Changed the content of “
Naming rule”
Changed so that files are divided in the
CDS
4 - 19 CDS (Compact Data
Storage)
Files (p.4-107)
Changed the content of
“Handling Precautions”
Changed the English description for type of
change to MANUAL in the display unit
6 - 2 Parameter Setting Display
Data
CONTROL bank (p.6-12)
(Changed again in June 2017)
Changed from “Ope upon
change to MAN” to “Operation
upon to MANUAL”
Changed the English description for MV
action if PV is bad in the display unit
6 - 2 Parameter Setting Display
Data
CONTROL bank (p.6-12)
(Changed again in June 2017)
Changed from “MV behavior if
PV is abnormal” to “MV select as
PV error”
Changed the block order for the parameter
settings in the analog input bank
6 - 2 Parameter Setting Display
Data
ANALOG INPUT bank (p.6-8)
Changed from (A4 → A3 → B4
→ B3) to (A4 → B4 → A3 → B3)
Changed the block order for the parameter
settings in the analog output bank, CT
input bank, and VT input bank
6 - 2 Parameter Setting Display
Data
ANALOG OUTPUT bank (p.6-16),
CT INPUT bank (p.6-31),
VT INPUT bank (p.6-32)
Changed from (A2 → A1 → B2
→ B1) to (A2 → B2 → A1 → B1)
Changed the design of the parameter item
setting change screen in the display unit
5 - 2 Parameter screen
Parameter item setting change screen
(p.5-45)
Deleted the loop numbers to the
left side of the set values

Support start date: December 2016
Block Firmware version (X is 0 to 9)
MAIN block 3.0.X
HMI block (display unit) 3.0.X
DI/DO block 3.0.X
RS-485 block 3.0.X
AO block (slots A1 to A2, B1 to B2) 3.0.X
AI block (slots A3 to A4, B3 to B4) 3.0.X

Added functions
Description User's Manual Reference User's Manual Change
Support for Japanese interface in display
unit
1 - 5 Button Operation
Japanese language display (p.1-16)
Added the content at left
6 - 2 Parameter Setting Display Data
Basic action bank (p.6-9)
Added “Interface language”
Added the Help screen of the parameter
settings in the display unit
5 - 2 Parameter screen
Parameter item setting change screen
(p.5-45)
Not changed
Added the alarm details screen in the
display unit
5 - 1 Monitor Screen and Graph
Screen
Function alarm screen (p.5-25)
Added a description of the
[Function alarm] button

Azbil C7G Specifications

General

Brand	Azbil
Model	C7G
Category	Controller
Language	English