5-48
Chapter 5. Screens

IP address
The IP address bank screen and setting procedures differ from usual.
The IP address, subnet mask, and default gateway each have four individual address
settings available.
After setting the individual addresses, touching [ENTER] finishes the setting change.
If [CANCEL] is touched, changes in the individual address settings are not applied.
(4)
(2)
(1)
(3)
(6)
(7)
(5)
(1) IP address setting
Displays the set value of the IP address.
Touching this portion displays the setting change screen for the individual
address you have touched.
(2) Subnet mask setting
Displays the set value of the subnet mask.
Touching this portion displays the setting change screen for the individual
address you have touched.
(3) Default gateway setting
Displays the set value of the default gateway.
Touching this portion displays the setting change screen for the individual
address you have touched.
(4) [CANCEL] button
Touching this button returns the display to the parameter item menu screen.
(5) [ENTER] button
Touching this button writes the IP address, subnet mask, and default gateway
settings, and returns the display to the parameter item menu screen.
(6) Home button
Pressing this button displays the Home screen.
To Next Page
Loading...
Need help?
General
