6-30
Chapter 6. Display and Setting Data
User-defined alarm bank
Bank selection: USER-DEFINED ALARM
Loop selection: None
Group selection: Groups 1 to 4
Groups 1 to 4 (common)
Item display Item Settings
Initial
value
Communication
Notes
Read
Write
RAM
EEPROM
Assignment1 Assignment 1 1024 to 2047:
Standard bits
For the standard bit
codes, refer to
14 - 2 Standard Bit
Codes and Standard
Numerical Codes
(p.14-6).
1024
# *
Assignment2 Assignment 2 1024
# *
Assignment3 Assignment 3 1024
# *
Assignment4 Assignment 4 1024
# *
Loop definition Loop definition 0: No
1: Loop 1
2: Loop 2
3: Loop 3
4: Loop 4
0
# *
Handling Precautions
• If the version of the MAIN block firmware is earlier than 6.x.x (where x stands
for any number), there is no user-defined alarm bank.
To Next Page
Loading...
