1-1
Chapter 1. Overview
1 - 1 Overview
The C7G multi-loop controller with multifunction display (hereafter also called simply "this device") can calculate
diagnostic parameters, known collectively as the health index, that help to predict failure of other equipment,
in addition to calculations for PID (proportional, integral and derivative) control of process variables such as
temperature, pressure, flow rate, pH, and liquid level.
This product consists of a display unit with a 3.5-inch QVGA LCD touch panel, as well as a main unit capable of
controlling up to four loops with an input sampling cycle of 10 ms and an indication accuracy of ± 0.1 % FS.
The display unit and main unit can be installed separately for installation flexibility.
A wide variety of interfaces, including Ethernet, RS-485 serial communication, microSD memory card, micro USB
port, and 7 digital input/outputs are provided as standard features.
Setup, operation, and monitoring can be easily accomplished using the display unit and Smart Loader Package.
This controller is compliant with IEC directives and is CE marked.
To Next Page
Loading...
Need help?
General
