5-42
Chapter 5. Screens

SEG-EV monitor screen
The statuses of segment events 1 to 16 can be monitored.
(4)
(2)
(3)
(1)
(5)
(1) Segment event status
A number with a green background indicates a terminal whose segment event is
ON.
A number with a gray background indicates a terminal whose segment event is
OF F.
If the actual segment event ON/OFF time is shorter than the display update
time, the status may not be reflected on the display.
(2) Screen forward and back buttons
When [Λ] is touched, the screen goes back to the previous screen, and when [V]
is touched, the screen switches to the next enabled screen among the DI/DO
monitor, DI monitor, DO monitor, and EV monitor screens.
(3) Close button
Touching this button returns the display to the previous screen.
(4) Home button
Pressing this button displays the Home screen.
(5) Menu button
Pressing this button displays the parameter bank menu screen.
Handling Precautions
• If pattern operation is disabled, the SEG-EV monitor screen is not displayed.
• If the version of the MAIN block firmware is earlier than 6.x.x (where x stands
for any number), the SEG-EV monitor screen is not displayed.
To Next Page
Loading...
Need help?
General
