1-16
Chapter 1. Overview
Parameter bank Parameter item
DATE TIME
Year, month, day, hour, minutes, and seconds
INPUT ASSIGNMENT
PV assignments for loops 1 to 4
RSP assignment for loops 1 to 4
Assignment range low limit for loops 1 to 4
Assignment range high limit for loops 1 to 4
VIRTUAL ANALOG INPUT
Virtual AI assignment of virtual AI 1 to 4
Filter of virtual AI 1 to 4
Ratio of virtual AI 1 to 4
Bias of virtual AI 1 to 4
Linearization table group definition of virtual AI 1 to 4
FIRMWARE VERSION
Version of MAIN block
Version of HMI block (display unit)
Version of DI/DO block
Version of RS-485 block
Version of blocks A1 to A4
Version of blocks B1 to A4
(Including additional display unit and CLOCK block)

Japanese language display
If the "Language indication" setting of the basic action bank is set to "1: Japanese,"
the banks, items, and descriptions displayed on the parameter setting screen and
some of the content on the mode change screen will appear in Japanese. The default
setting for "Language indication" is "0: English."
To Next Page
Loading...
Need help?
General
