Azbil C7G - Page 33

1-15
Chapter 1. Overview
Parameter bank Parameter item
LINEARIZATION TABLE
Operation type of linearization table groups 1 to 8
10 break points of linearization table groups 1 to 8
CASCADE
Scaling method
Scaling low limit
Scaling high limit
Filter
PATTERN CONFIG
Pattern start number for loops 1 to 4
Pattern start number low limit for loops 1 to 4
Pattern start number high limit for loops 1 to 4
PTN SP increase change limit for loops 1 to 4
PTN SP decrease change limit for loops 1 to 4
PATTERN
Number of segments of patterns 1 to 16
G.SOAK time of patterns 1 to 16
PV start of patterns 1 to 16
Cycle of patterns 1 to 16
Pattern link of patterns 1 to 16
End of operation of patterns 1 to 16
SEGMENT
SP of segments 1 to 16 of patterns 1 to 16
Time of segments 1 to 16 of patterns 1 to 16
PID Group of segments 1 to 16 of patterns 1 to 16
G.SOAK type of segments 1 to 16 of patterns 1 to 16
G.SOAK width of segments 1 to 16 of patterns 1 to 16
Segment event in segments 1 to 16 of patterns 1 to 16
GRAPH
Multi-loop recording cycle for loops 1 to 4
Graph scaling low limit for loops 1 to 4
Graph scaling high limit for loops 1 to 4
ETHERNET
Modbus/TCP port number
IP ADDRESS
IP address
Subnet mask
Default gateway
RS-485
Station address
Transmission speed
Data type (parity)
Data type (stop bits)
Minimum response time
CDS
Recording cycle
Operation type
HEALTH INDEX
Operation type for loops 1 to 4
R value scale for loops 1 to 4
Ideal data for loops 1 to 4
Deviation low limit for loops 1 to 4
Deviation high limit for loops 1 to 4
HEALTH INDEX GRAPH
The 10 latest specific R value graph for loops 1 to 4