Utility Stitches
102
4 Attach the compact dual feed to the
machine without attaching the couching
dual feed foot.
* Refer to “Attaching the Compact Dual Feed Foot”
on page 49.
5 Pass the yarn through the telescopic
thread guide and the yarn guide (1) to
(2).
6 Thread the yarn through the couching
dual feed foot.
Pass the yarn through the loop in the
yarn threader, and then pass the threader
from top to bottom through the hole on
the couching dual feed foot.
7 Attach the couching dual feed foot
shown below to the compact dual feed.
8 Pull out the yarn for about 10 cm
(approx. 4 inches) to the back of the
machine.
9 Touch to unlock all keys and buttons.
10 Thread the machine with the upper
thread.
Sewing Couching
1
Select .
2 Measure the width of the yarn and set the
stitch width according to the width of the
yarn.
3 Rotate the handwheel to set the needle in
the sewing start position. Start sewing on
the right side of the yarn.
4 Make sure that the yarn passes straight
through the channel in the back of the
couching dual feed foot, and then lower
the presser foot.
a Channel
• Make sure that the yarn does not become
entangled as you work.
• Do not use the spool stand for upper thread.
Otherwise thread may tangle with yarn.
• Make sure that there is enough width to wrap
over the yarn.
• Pull off an appropriate amount of yarn from the
ball or skein so the yarn does not become taut.
To Next Page
