Brother EV1 - Setting the Stitch Width;Stitch Length;L;R Shift; Stitch Settings

Stitch Settings
Sewing Basics
61
2
When you select a stitch, your machine
automatically selects the appropriate stitch
settings. However, if needed, you can change
any of the individual settings.
 Setting the Stitch Width
Touch or to make the stitch wider or
narrower.
 Setting the Stitch Length
Touch or to make the stitch
coarser (longer) or finer (shorter).
 Setting the [L/R Shift]
Touch or to change the placement of
the stitch pattern by moving it left and right.
Stitch Settings
Setting the Stitch Width/Stitch
Length/“L/R Shift”
Note
• After adjusting the stitch width or the “L/R
Shift”, slowly turn the handwheel toward you
(counterclockwise) and check that the needle
does not touch the presser foot.
Memo
• Touch [Reset] to return the setting to its
default.
• Settings for some stitches cannot be changed.
• If you turn off the machine or select another
stitch without saving stitch setting changes
(page 63), the stitch settings will return to their
default settings.
IMPORTANT
• If the stitches get bunched together, lengthen the stitch
and continue sewing. Do not continue sewing without
lengthening the stitch. Otherwise, the needle may bend
or break.