Create the Pattern Using Scanned Images or Image Data Files
247
My Design Center
6
Custom patterns can be created from color
illustrations. You can create patterns by scanning
an illustration or importing an image data file.
Recommended illustrations for Illustration
Conversion
• Illustrations that are clearly drawn, with no
gradation, fading or blurriness.
• Illustrations that are at least a 5 mm square
• Illustrations that are extremely simple images
1 Touch .
2 Touch [Illustration design].
3 When scanning the scanning frame or
the embroidery frame, touch [Scan].
When importing an image data file, select
the device you saved the data to.
For this example, import the image data
file.
a When this key is touched, the message to start
scanning appears. Touch [OK] to start scanning.
b The most recently scanned image is automatically
stored in the machine’s memory. Touch this key to
import the scanned image.
c Touch to import the data file saved on a USB
media. Save data as a .jpg, .bmp, or .png file type,
on a USB media. For details on files that can be
imported, refer to “Specifications” on page 271.
d Touch to transfer an image that was saved on the
smart device then sent to the machine. (page 226)
Create a Pattern with Illustration
Conversion
• When converting a scanned/imported
background image to be displayed on the
screen, skip step
3 and proceed to step 4.
To Next Page
Loading...
