6
Laser Notices (For U.S.A.
only)
Laser Safety
This sewing machine is certified as a Class 1 laser product
under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the
Radiation Control for Health and Safety Act of 1968. This
means that the sewing machine does not produce
hazardous laser radiation.
IEC 60825-1 Specification
This machine is a Class 1 laser product as defined in IEC
60825-1:2014 specification.
The invisible laser beam emitted by the laser unit installed in
this stitch regulator is restricted to an output at a safe level.
The stitch regulator contains 0.6-milliwatt, 840-860
nanometer wavelength, 1.5 mrad divergence angle, pulse
duration 26 µs, pulse frequency 10 kHz, laser module.
However, eye damage may result from disassembling or
altering this stitch regulator.
Safety precautions have been designed to prevent any
possible laser beam exposure to the operator.
FDA Regulations
U.S. Food and Drug Administration (FDA) has implemented
regulations for laser products manufactured on and after
August 2, 1976. Compliance is mandatory for products
marketed in the United States. The label shown on the back
of the sewing machine indicates compliance with the FDA
regulations and must be attached to laser products
marketed in the United States.
Laser Notices (For
European countries)
EN 60825-1:2014+A11:2021 and EN
50689:2021 Specification
This machine is Class 1 consumer laser product in EN
60825-1:2014+A11:2021 and EN 50689:2021
specifications.
This laser measures the direction and amount of movement
of the cloth.
Laser Notices (For
countries except U.S.A.
and European countries)
IEC 60825-1 Specification
This machine is a Class 1 laser product as defined in IEC
60825-1:2014 specification.
For countries except
U.S.A.
The invisible laser beam emitted by the laser unit installed in
this stitch regulator is restricted to an output at a safe level.
The stitch regulator contains 0.6-milliwatt, 840-860
nanometer wavelength, 1.5 mrad divergence angle, pulse
duration 26 µs, pulse frequency 10 kHz, laser module.
However, eye damage may result from disassembling or
altering this stitch regulator.
Safety precautions have been designed to prevent any
possible laser beam exposure to the operator.
Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561,
JAPAN
This product complies with FDA performance standards
for laser products except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56,
dated May 8, 2019.
CAUTION
• Use of controls, adjustments or the performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure.
CAUTION
• This machine has a Laser module in the stitch regulator.
The stitch regulator should not be opened under any
circumstances.
• Use of controls, adjustments or the performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure.
CLASS 1 CONSUMER
LASER PRODUCT
EN 50689:2021
To Next Page
Loading...
