Utility Stitches
Various Stitches
87
3
12 Sew with the fold of the hem against the
presser foot guide.
* We recommend to stitch reinforcement stitches at
the beginning and end of the hem.
13 Press the “Start/Stop” button to stop
sewing when you are finished, and raise
the presser foot and needle to pull the
fabric under the presser foot towards the
back of the machine.
14 Remove the basting stitching and
reverse the fabric.
a Wrong side of fabric
b Right side of fabric
With one-step buttonholes, you can make
buttonholes appropriate to the size of your
button.
One-step buttonholes are sewn from the front of
the presser foot to the back, as shown below.
a Reinforcement stitching
IMPORTANT
• Be sure to pull the fabric towards the back of the
machine after sewing. If you pull the fabric toward side
or forward, the presser foot may be damaged.
One-Step Buttonholes
• For details on projecting buttonhole stitches
and guidelines, refer to the following.
- “Projecting/Editing the Stitch Pattern with the
Projector” on page 70
- “Buttonhole Guidelines” on page 68
• For details on stitch patterns, refer to “Stitch
Chart” on page 273.
To Next Page
Loading...
