Specifications
272
*1
The wireless network connection complies with IEEE 802.11b/g/n standards and uses the 2.4 GHz frequency.
Use Design Database Transfer or PE-DESIGN version 11 or later to transfer data from your computer to the machine. For the operating
systems compatible with the software, visit our website https://s.brother/cndkb/
.
*2
When recalling data saved with a different machine model, it may not appear as it was saved. Check the recalled data.
*3
“.pmp”, “.pmv”, “.pmu” or “.pmx” stitch data files can be retrieved; however, when the machine is used to save the file, it is saved as a
“.pmz” stitch data file. Using data other than what was created using this machine or the machine which create “.pmp”, “.pmv”, “.pmx” or
“.pmu” data file, may cause the machine to malfunction.
*4
Using data other than that saved using our data design systems or this machine may cause this machine to malfunction. When the
machine is used to save a file with any extension, it is saved as a .phx data file.
Since Tajima (.dst) data does not contain specific thread color information, it is displayed with our default thread color sequence. Check
the preview and change the thread colors as desired.
• We recommend using the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 through
9, “-”, and “_” for the name of the file/folder.
IMPORTANT
• When using embroidery data other than our original patterns, the thread may break or the needle may bend or break
when embroidering with a stitch density that is too fine or when embroidering three or more overlapping stitches. In that
case, use one of our original data design systems to edit the embroidery data.
To Next Page
Loading...
