EasyManuals Logo
Home>Campbell>Measuring Instruments>CR1000

Campbell CR1000 User Manual

Campbell CR1000
678 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #521 background imageLoading...
Page #521 background image
Section 11. Glossary
Term. mV
The SI abbreviation for millivolts.
Term. NAN
Not a number. A data word indicating a measurement or processing error.
Voltage over-range, SDI-12 sensor error, and undefined mathematical results
can produce NAN. See the section NAN and ±INF
(p. 482).
Term. neighbor device
Device in a PakBus network that communicate directly with a device without
being routed through an intermediate device. See PakBus
(p. 522).
Term. NIST
National Institute of Standards and Technology
Term. node
Devices in a network usually a PakBus network. The communication
server dials through, or communicates with, a node. Nodes are organized as a
hierarchy with all nodes accessed by the same device (parent node) entered as
child nodes. A node can be both a parent and a child. See PakBus —
Overview
(p. 88).
Term. NSEC
Eight-byte data type divided up as four bytes of seconds since 1990 and four
bytes of nanoseconds into the second. See Data Type
(p. 131, p. 130) tables.
Term. null-modem
A device, usually a multi-conductor cable, which converts an RS-232 port
from DCE to DTE or from DTE to DCE.
Term. Numeric Monitor
A digital monitor in datalogger support software
(p. 654) or in a keyboard
display.
Term. offset
A term, often a parameter in a CRBasic measurement instruction, that
designates the y-intercept (aka, shifting factor or zeroing factor) in a linear
function. For example, when converting °C to °F, the equation is °F =
°C*1.8 + 32. The factor 32 is the offset. See Term. multiplier
(p. 520).
Term. ohm
The unit of resistance. Symbol is the Greek letter Omega (Ω). 1.0 Ω equals
the ratio of 1.0 volt divided by 1.0 ampere.
521

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Campbell CR1000 and is the answer not in the manual?

Campbell CR1000 Specifications

General IconGeneral
BrandCampbell
ModelCR1000
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals