Address Table Commands
show ports security addresses
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 99
5
e4 Port is a member in port-channel ch1
e5 Disabled Lock - 1
e6 Enabled Max-addresses 0 10
ch1 Enabled Max-addresses 0 50
ch2 Enabled Max-addresses 0 128
This example displays dynamic addresses in the currently locked port e1.
Console# show ports security addresses ethernet e1
Port Status Learning Current Maximum
---- -------- -------- ------- -------
e1 Disabled Lock - 1
To Next Page
Loading...
