Cisco SPS2024 - Clear Arp-Cache

IP Address Commands
clear arp-cache
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 216
15
Example
The following example configures the ARP timeout to 12000 seconds.
Console(config)# arp timeout 12000
clear arp-cache
The clear arp-cache Privileged EXEC mode command deletes all dynamic entries
from the ARP cache.
Syntax
clear arp-cache
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example deletes all dynamic entries from the ARP cache.
Console# clear arp-cache