Cisco SPS2024 - Show Rmon Alarm-Table

RMON Commands
show rmon alarm-table
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 325
25
• Sample interval — 360000 seconds
• Rising threshold — 1000000
• Falling threshold — 1000000
• Rising threshold event index — 10
• Falling threshold event index — 20
Console(config)# rmon alarm 1000 LinkSys 360000 1000000 1000000
10 20
show rmon alarm-table
The show rmon alarm-table Privileged EXEC mode command displays the alarms
table.
Syntax
show rmon alarm-table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the alarms table.
Console# show rmon alarm-table