Cisco SPS2024 - Show Snmp Groups

SNMP Commands
show snmp groups
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 356
26
Parameters
•
viewname — Specifies the name of the view. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
Console# show snmp views
Name OID Tree Type
---------- ------------------ --------
user-view 1.3.6.1.2.1.1 Included
user-view 1.3.6.1.2.1.1.7 Excluded
user-view 1.3.6.1.2.1.2.2.1.*.1 Included
show snmp groups
The show snmp groups Privileged EXEC mode command displays the
configuration of groups.
Syntax
show snmp groups [ groupname ]