Cisco SPS2024 - Switchport General Ingress-Filtering Disable

VLAN Commands
switchport general ingress-filtering disable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 495
34
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode
command disables port ingress filtering. Use the no form of this command to
restore the default configuration.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables port ingress filtering on Ethernet port 1
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general ingress-filtering
disable