Cisco SPS2024 - Name

VLAN Commands
name
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 485
34
Configuring all ports may consume an excessive amount of time. Define only the
required ports to save time.
Example
The following example groups VLANs 221 through 228 and 889 to receive the
same command.
Console(config)# interface range vlan 221-228,889
Console(config-if)#
name
The name Interface Configuration mode command adds a name to a VLAN. Use
the no form of this command to remove the VLAN name.
Syntax
name string
no name
Parameters
•
string — Unique name to be associated with this VLAN. (Range: 1-32
characters)
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode. Cannot be configured for a range of
interfaces (range context).