Cisco SPS2024 - Show Fiber-Ports Optical-Transceiver

PHY Diagnostics Commands
show fiber-ports optical-transceiver
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 257
20
User Guidelines
The port must be active and working in 1000M mode.
Example
The following example displays the estimated copper cable length attached to all
ports.
Console# show copper-ports cable-length
Port Length (meters)
---- ------------------
e1 < 50
e2 Copper not active
e3 110-140
g4 Fiber
show fiber-ports optical-transceiver
The show fiber-ports optical-transceiver Privileged EXEC mode command
displays the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [ interface ] [detailed]
Parameters
•
interface — A valid Ethernet port.
• detailed — Display detailed diagnostics.
Default Configuration
This command has no default configuration.