Cisco SPS2024 - Show Interfaces Description

Ethernet Configuration Commands
show interfaces description
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 170
12
5 100M-Copper Enabled 100f, 100h, 10f, 10h
6 100M-Copper Enabled --
7 100M-Copper Enabled --
8 100M-Copper Enabled --
9 100M-Copper Enabled --
10 100M-Copper Enabled --
11 100M-Copper Enabled --
12 100M-Copper Enabled --
show interfaces description
The show interfaces description Privileged EXEC mode command displays the
description for all configured interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-
number
]
Parameters
•
interface — Valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.