Cisco SPS2024 - Description

Ethernet Configuration Commands
description
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 153
12
description
The description Interface Configuration (Ethernet, port-channel) mode command
adds a description to an interface. Use the no form of this command to remove the
description.
Syntax
description string
no description
Parameters
•
string — A comment or a description of the port to allow the user to
remember the purpose of the interface. (Range: 1-64 characters)
Default Configuration
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a description to Ethernet port e5.
Console(config)# interface ethernet e5
Console(config-if)# description “RD SW#3”