Cisco SPS2024 - Show System Tcam Utilization

System Management Commands
show system tcam utilization
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 455
31
show system tcam utilization
The show system tcam Privileged EXEC mode command displays the Ternary
Content Addressable Memory (TCAM) utilization.
Syntax
show system tcam utilization [unit unit ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on features control.
Console> show system tcam utilization
TCAM utilization: 58%