Cisco SPS2024 - Ip Arp Inspection List Assign

ARP Inspection Commands
ip arp inspection list assign
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 70
4
Example
The following example displays static ARP binding.
Console(config)# ip arp inspection list servers
Console(config-ARP-list)# ip 172.16.1.1 mac 0060.704C.7321
Console(config-ARP-list)# ip 172.16.1.2 mac 0060.704C.7322
ip arp inspection list assign
The ip arp inspection list assign Global Configuration mode command assigns
static ARP binding lists to a VLAN. To delete the assignment, use the no form of this
command.
Syntax
ip arp inspection list assign vlan-id name
no ip arp inspection list assign vlan
Parameters
•
vlan-id — Specifies the VLAN ID.
• name — Specifies the list name.
Default Configuration
No static ARP binding list assignment exists.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.