VLAN Commands
default-vlan vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 482
34
Example
The following example creates the VLAN number 1972.
Console(config)# vlan database
Console(config-vlan)# vlan 1972
default-vlan vlan
The default-vlan vlan VLAN Configuration mode command defines the default
VLAN. Use the no form of this command to return to default.
Syntax
default-vlan vlan
vlan-id
no default-vlan vlan
Parameters
•
vlan-id
— VLAN ID of the default VLAN.
Default Configuration
The default configuration is disabled.
Command Mode
VLAN Configuration
User Guidelines
No user guidelines for this command.
To Next Page
Loading...
